-
Transformer Winding Deformation AnalysisSystem Introduction e Sweep Frequency Response Analyzer is used for power transformer with voltage grade of 66kV and above and other transformers with special purpose. The power transformer is
-
Sweep Frequency Response AnalysersProducts Description Overview The Transformer winding deformation tester transformer winding deformation tester is used to test the deformation of power transformers with voltage levels of 66kV and
-
DC Resistance TesterDC Resistance Tester is essential in transformer handover, overhaul and change of the lead switch, it's also the important inspection program to after transformer fault. Features 1. Output
-
Handheld Zinc Oxide Arrester Tester For Various Electrical Parameters TestProducts Description Handheld zinc oxide arrester tester is a special instrument used for field and laboratory testing of various electrical parameters of arresters. This instrument adopts advanced
-
Sweep Frequency Response AnalysisAdvanced SFRA Sweep Frequency Response Analyzer for detecting transformer winding deformation and mechanical faults. Measures frequency response from 20Hz to 2MHz. Ideal for post-fault analysis,
-
Transformer short-circuit impedancePrecision Transformer Short-Circuit Impedance Tester for measuring Uk% and load loss (Pk). Features three-phase simultaneous testing, automatic calculation, and compliance with IEC 60076. Ideal for
-
Sweep Frequency AnalysisProducts Description An instrument used for measuring the deformation of transformer windings High Precision Transformer Winding Tester Transformer Winding Deformation Tester (also known as
-
Sweep Frequency Response AnalyzerOverview The Professional Transformer Winding Deformation Tester with transformer winding deformation tester is used to test power transformers with voltage levels of 66kV and above and other
-
Short Circuit Impedance TestingProduct Overview High Precision Transformer Short Circuit Impedance Short-circuit impedance is an important parameter of the transformer. The short-circuit impedance method is a traditional method
-
On-Load Tap ChangersProducts Description Product Overview Tap Changer Detector on-load tap changer tester is used to test the switching state of the on-load tap changer. On-site staff can test the performance of on-load
-
Sweep Frequency ResponseOverviewThe transformer winding deformation tester is used to test power transformers with voltage levels of 66kV and above and other special-purpose transformers. Power transformers are inevitably
-
Lightening Surge Arrester Discharge Counter TesterProducts Description Product Overview Handheld Arrester Tester handheld wireless zinc oxide tester is only used to test the full current and resistive current of zinc fluoride lightning arrester.
View the TI SFRA Driver or library downloads, description, features and supporting documentation and start designing....
FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response...
Detect potential mechanical and electrical problems in power transformers - FRAX099, FRAX101, FRAX150. The FRAX series offers a large dynamic range with high accuracy, and meets all...
The TI SFRA library consists of the following components: • Header files and software library for fixed- and floating-point computation • C2000 Software Frequency Response Analyzer (SFRA) Library...
The Doble M5200 Sweep Frequency Response Analyzer (SFRA) detects mechanical failure or movement of windings due to short circuits, mechanical stresses or transportation. The M5200 uses Sweep...
Adiradh Energy offers Sweep frequency response analyzer (SFRA) Models FRAX101-FRAX99-FRAX150 detects mechanical and electrical changes of the core and winding assembly of power transformers. Major...
