The definition and causes of winding deformation in power transformers

Jun 11, 2025

Leave a message

1. Winding deformation refers to the change in the original shape and structure of a transformer winding under the influence of external or internal factors. This deformation may be minor or severe, but regardless of the degree, it may affect the normal operation of the transformer. The causes of winding deformation are diverse, including but not limited to the following points:

Short-circuit current impact: When a short circuit occurs in the power system, the transformer is subjected to a huge short-circuit current, and the windings are acted upon by a strong electromagnetic force, which may cause them to deform.
2. Mechanical stress during transportation and installation: If a transformer is improperly handled during transportation and installation, such as due to vibration or collision, it may also cause winding deformation.

3. Manufacturing process issues of the transformer itself: If there are defects or deficiencies in the windings during the manufacturing process, such as loose winding or poor insulation, deformation may also occur during operation.

Ii. Hazards of Winding Deformation

The hazards of winding deformation to transformers are mainly manifested in the following aspects:

1. Impact on electrical performance: Winding deformation may lead to changes in electrical parameters such as impedance and capacitance, thereby affecting the normal operation of the transformer.

2. Reduced operational efficiency: Winding deformation may lead to an increase in iron and copper losses of the transformer, thereby reducing its operational efficiency.

3. Cause faults: When the winding deformation is severe, it may lead to inter-turn short circuits, ground short circuits and other faults, and even cause serious accidents such as transformer explosions.

Send Inquiry