High-Voltage Bridge Cable Fault Tester Underground Bridge Fault Pre-Locato

High-Voltage Bridge Cable Fault Tester Underground Bridge Fault Pre-Locato
Details:
The high-voltage bridge cable fault tester is designed based on the MURRAY bridge principle, and is applicable to the location of the breakdown points (low resistance, high resistance and flashover type breakdown) of various wires and cables after laying and the points without breakdown but with low insulation resistance: for example, the insulation defect points with low cable resistance but without breakdown under operating voltage are found by using a megohmmeter. It can also be used to locate the defect points of various cables in the cable factory.
Send Inquiry
Description
Send Inquiry

Dual Canopy Mechanic Electrical Engineering Co., Ltd. is one of the leading manufacturers and suppliers of High-Voltage Bridge Cable Fault Tester Underground Bridge Fault Pre-Locato in China. Please feel free to wholesale discount products for sale here and get quotation from our factory. Customized orders are welcome.

 

High-Voltage Bridge Cable Fault Tester  Products Description

The high-voltage bridge cable fault tester is designed based on the MURRAY bridge principle, and is applicable to the location of the breakdown points (low resistance, high resistance and flashover type breakdown) of various wires and cables after laying and the points without breakdown but with low insulation resistance: for example, the insulation defect points with low cable resistance but without breakdown under operating voltage are found by using a megohmmeter. It can also be used to locate the defect points of various cables in the cable factory.
There are two methods for fault location of rough cable: bridge method and wave reflection method.

The wave reflection positioning instrument is more popular. Its disadvantages are: some instruments have complex field wiring and blind spots. When the waveform is not typical, the positioning personnel are required to master the instrument skillfully and be experienced to distinguish the pulse waveform. There are several cable faults that are difficult to find with the wave reflection method: for example, the insulation defect point of the high voltage cable sheath, the steel tape armored low pressure cable, the PVC cable, without the reflected wave, cannot be located. Short cable, unable to locate. Some high resistance breakdown points cannot be broken down under impulse voltage and are difficult to locate.
The high voltage bridge cable fault tester contains a high frequency and high voltage constant current source, which solves the problem of interference of the power supply to the high sensitivity amplification of the bridge. The power supply and the bridge are integrated. The measuring cable is a special high-voltage cable, which adopts the four-terminal resistance measurement principle and has high positioning accuracy. The bridge is placed at the high-voltage side, and the operating button is grounded safely. The limitation of the bridge method used for high resistance positioning has been completely solved, and the bridge method has the characteristics of no blind area, accuracy and convenience.

product-1119-561

High-Voltage Bridge Cable Fault Tester Main features

(1) SCM centralized control, with strong anti -interference ability.

(2) Nickel hydrogen battery and charger, therefore, the instrument can work under AC / DC.

(3)Built in a micro printer can print test waveforms and related content at any time.

(4) At the "sample" state, "pulse 1" "pulse 2" can be arbitrary switched.

(5) With left and right displacement, extended compression test waveform function, in order to clearly observe any inflection point of the test waveform.

Test voltage:

negative high voltage, 0~15kV, continuously adjustable

Maximum current:

30mA

Test scale accuracy:

± (0.2%·L±1) meters

Burn-through voltage:

0~15kV, continuously adjustable

Burn-through current:

30mA

Anti-interference ability:

> 100VAC

 

product-1280-1280

product-1280-1280

 

20250613152229
Dual Canopy Mechanical Electrical Engineering Co., Ltd.

Dual Canopy Mechanical Electrical Engineering Co., Ltd. stands as a preeminent high-tech enterprise at the forefront of electrical system automation and precision testing.

We focus on innovative R&D, developing cutting-edge intelligent control systems and automated monitoring solutions. These meticulously designed systems significantly enhance the stability, efficiency, and overall performance of modern power systems. Our high-precision testers and sophisticated fault diagnosis instruments, with their superior data acquisition accuracy and efficient, in-depth analysis capabilities, have earned us the trust of power companies worldwide.

How To Cooperate With Us?

Our address

Baoding Cloud Center, Hebei, China

Phone Number

+86 13483219412

E-mail

salesm@dualcanopy.com

modular-1

 

 

 

Hot Tags: High-Voltage Bridge Cable Fault Tester Underground Bridge Fault Pre-Locato, China High-Voltage Bridge Cable Fault Tester Underground Bridge Fault Pre-Locato manufacturers, suppliers, factory

Send Inquiry